Amphenol /Pyle Industrial Connectors, Star-Line , Star-Line EX , Star-Lok
The Star-Line EX® Series is a hybrid form of the parent Starline® product line. The series is certified for use in a Zone 1-IIc hazardous environment. Classified facilities such as petrochemical refineries, land and offshore drilling systems are but a few of the applications for this broad product series.
Hazardous area, environmental connector IP68-8.
For use in a zone 1-IIC environment #03ATEX1101X file #51A4467).
Cenelec certified EEXd IIC-T6, flame and dust proof.
Ratings, EExd, and EExde.
CE Approved, AEX approved.
Globally recognized for use in explosive atmospheres.
Rated for use up to 1000V AC/DC.
Designed for the roughest industrial applications.
Large coupling sleeve, secured with captive set screws.
Strong machined aluminum construction.
Double lead threaded coupling system.
Vast family of reversible inserts, for power, signal and mixed applications.
Extensive array of hardware & strain relief options.
Offshore Oil Rigs.
Offshore Production Platforms.
Fuel Storage Areas.
Airport Fueling Pits.
Paint Spray Booths.
Paint Storage Areas.
Pharmaceutical Manufacturing Equipment.
The Star-Line EX Series is a hybrid form of the parent Star-line product line. The series is certified for use in a Zone 1-IIc hazardous environment. Classified facilities such as petrochemical refineries, land and offshore drilling systems are but a few of the applications for this broad product series.
• ATEX CERTIFIED – for Zone 1-IIc hazardous environment
Certificate number 03ATEX1101X.
• CENELEC IP68-8 RATED –
Listed under EEx d IIc T6.
Plugs and receptacles listed under EEx de IIc T6.
• HARD ANODIC COATING – All machined aluminum parts
finished with a hard, scratch-resistant coating per MIL-A-
8625, Type III. Dielectric strength 1800 volts. Heat resistance
of 750° F.
• SOLDER, CRIMP AND PRESSURE TERMINALS
• REVERSIBLE INSERTS – A full range of contact inserts for
power, signal and mixed applications are available. All are
interchangeable and reversible to suit specific needs.
• EASILY ACCESSIBLE WIRE TERMINALS – Conductors
are readily terminated to contacts. Cable housings are
slipped over conductors or leads after terminating.
Cumbersome handling and seating of inserts with conductors
attached is eliminated.
• LARGE WIRING SPACE – Ample wiring space is provided in
cable housings and hardware.
• HIGH TENSILE STRENGTH ALUMINUM – Bar Stock
Components precision machined. Points of impact designed
for extra strength.
• CABLE OPTIONS – Starline EX Series can be terminated
onto unarmored or armored and sheathed cables built to
IEEE-45 / UL1309, IEC, BS, DIN and JIC standards.
Flexible cables like SOOW-A, W, G-GC and DLO constructions
can also be used with this Series.
• EX CABLE GLANDS – Wide variety of glands are available
for Star-Line EX connectors. For more information ask for
new Amphenol Cable Glands and Cord Grips catalog 12-055.
• INSERT VARIETY – A broad range of inserts are offered
ranging from single-contact to 143 contacts.
High amperage up to 1135 amps at 1000V / AC or DC. Contacts are high quality copper with silver plating.(Gold
plating available as an option) Composite inserts for power, control and instrumentation service available.
• RADSOK® HIGH AMPERAGE CONTACTS – Special arrangements are available with RADSOK high amperage
contacts. Standard Star-line EX inserts are not interchangeable with new RADSOK contact insert arrangements.